belts for Leo

Leo is in a long and skinny phase where for his pants to be long enough they're too big in the waist, so I made him some D-ring belts.

to make a simple ribbon belt you'll need:

• ribbon (grosgrain works best for me, but experiment and find what you like)
• D-rings
• sewing machine/needle & thread
• optional: fray check or lighter

determine the length you want the belt to be (I made Leo's  24" long), double it, and add 3/4".  cut to size and melt the ends of the ribbon if it's synthetic, or glue them if it's natural fibers to keep them from fraying.

overlap the D-rings by 1/2" and sew across. with the other end, fold in half and overlap the end you just sewed by 1/4" and sew across really well.

sew from the end with the d-rings all the way down to the other end. turn and sew across the folded edge, then turn again and sew back up the other side to the d-ring end. turn again and sew across to where you started from, back stitch to secure your stitches, and that's it!